The hot tub pressure switch is an integral part of any hot tubs equipment. Installed on the heater unit, the pressure switch will measure the water pressure travelling through the heater to make sure that it is not heating whilst suffering low pressure or no flow due to a pump failure or blockage.
The pressure switch will relay the information to the spa pack control board that then sends the information to the top side panel with an error code.
The following codes will warn you of either a pressure switch or flow switch failure:
Multi poled 4 function air switch will work with any air button to operate hot tub pumps or air blowers via air pressure.
The Dtec2 pressure switch is the latest version of the Dtec pressure switch from Gecko and replaces the Dtec1 version. easy to install and will rep...
View full detailsThe Harwil flow switch 4090540 is the replacement for all Gecko controlled hot tubs. Specifications 1/2" NPT x 3" Length Replaces Pacific, Sundanc...
View full detailsThe Harwil flow switch 4090540 is the replacement for all Beachcomber hot tubs. Specifications 1/2" NPT x 3" Length Replaces Beachcomber Flow swit...
View full detailsThe air button is used to send air pressure to an air switch that will operate either a jet pump or air blower. The hole size needs to be 1 3/4" ...
View full detailsPlastic Pressure Switch, 1/8" NPT, 21 Amp 24/240V , 1-5PSI
The Tecmark pressure switch model 4010P 1/8" MPT male-part threads plastic is perfect for salt water & high moisture areas. 0.5 to 11 P.S.I. ad...
View full detailsThe Tecmark pressure switch model 4028P is perfect for salt water & high moisture areas. 0.5 to 11 P.S.I. adjustable pressure detection 21 Amp ...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
