Skip to content
Enjoy Free shipping over $99.00* -No Coupon Need - Restrictions apply
Free shipping over $99.00

Hot tub temp sensors for Balboa, Gecko

If you find that your hot tub does not register the correct temperature on the top side display, you may need to replace the temp sensor to correct this.

An easy diagnoses is to remove the temp sensor and place in a container of hot water making sure you know the correct temperature. Once you have left the temp sensor in the water for 2 minutes check the top side display reading and compare with the thermometer in the container. 

If you have a discrepancy between the two then replace the temp sensor with a new one.

  • Original price $69.95 - Original price $69.95
    Original price
    $69.95
    $69.95 - $69.95
    Current price $69.95

    Balboa Hot tub High Limit Sensor 31”, ¼” Diameter (2-Pin Connect) Non-M7

    Balboa

    Balboa Hi Limit Pobe/ Sensor 30298, This Sensor Assembly Hi Limt Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has a 3...

    View full details
    Original price $69.95 - Original price $69.95
    Original price
    $69.95
    $69.95 - $69.95
    Current price $69.95
  • Original price $16.25 - Original price $16.25
    Original price
    $16.25
    $16.25 - $16.25
    Current price $16.25

    Balboa Hot tub Sensor Mount For M7: VS/Value Spa Pack

    Balboa

    The Balboa Sensor mount is for the M7 and VS/ Value spa pack systems only. Use this mount for the Temp Sensor and the Hi Limit probes This item is ...

    View full details
    Original price $16.25 - Original price $16.25
    Original price
    $16.25
    $16.25 - $16.25
    Current price $16.25
  • Original price $68.32 - Original price $68.32
    Original price
    $68.32
    $68.32 - $68.32
    Current price $68.32

    Balboa Hot tub Temperature Sensor, 25', ⅜” Diameter (2 Pin Connect)

    Balboa

    Balboa Temperature Sensor 30327, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has ...

    View full details
    Original price $68.32 - Original price $68.32
    Original price
    $68.32
    $68.32 - $68.32
    Current price $68.32
  • Original price $79.45 - Original price $79.45
    Original price
    $79.45
    $79.45 - $79.45
    Current price $79.45

    Balboa Hot tub Temperature Sensor, 50', ⅜” Diameter (2 Pin Connect)

    Balboa

    Balboa Temperature Sensor 30326, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has ...

    View full details
    Original price $79.45 - Original price $79.45
    Original price
    $79.45
    $79.45 - $79.45
    Current price $79.45
  • Original price $59.00 - Original price $59.00
    Original price
    $59.00
    $59.00 - $59.00
    Current price $59.00

    Balboa Hot tub Temperature Sensor, 96”, ⅜” Diameter (2 Pin Connect)

    Balboa

    Balboa Temperature Sensor 30294, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug   Temperature Sensor...

    View full details
    Original price $59.00 - Original price $59.00
    Original price
    $59.00
    $59.00 - $59.00
    Current price $59.00
  • Original price $96.32 - Original price $96.32
    Original price
    $96.32
    $96.32 - $96.32
    Current price $96.32

    Balboa Hot tub Temperature Sensor, Value/LE Non-M7

    Balboa

    Balboa Temperature Sensor 30352, This Sensor Assembly a Temperature Sensor and connects to the spa pack board.    Temperature Sensor 96" Cord  Th...

    View full details
    Original price $96.32 - Original price $96.32
    Original price
    $96.32
    $96.32 - $96.32
    Current price $96.32
  • Original price $219.75 - Original price $219.75
    Original price
    $219.75
    $219.75 - $219.75
    Current price $219.75

    Balboa Sensor Assembly, 31” High Limit, Temperature, 25’ (4- Pin Connect)

    Balboa

    Balboa Hi Limit / Temperature Sensor 30337-25, This Sensor Assembly Contains two Sensors a Hi Limit and a Temperature Sensor and connects via a 4 P...

    View full details
    Original price $219.75 - Original price $219.75
    Original price
    $219.75
    $219.75 - $219.75
    Current price $219.75
  • Original price $96.32 - Original price $96.32
    Original price
    $96.32
    $96.32 - $96.32
    Current price $96.32

    Balboa Sensor Assembly, 31” High Limit, Temperature, 96"’ (4- Pin Connect)

    Balboa
    10+ in stock

    Balboa Hi Limit / Temperature Sensor 30337, This Sensor Assembly Contains two Sensors a Hi Limit and a Temperature Sensor and connects via a 4 Pin ...

    View full details
    Original price $96.32 - Original price $96.32
    Original price
    $96.32
    $96.32 - $96.32
    Current price $96.32
  • Original price $75.49
    Original price $75.49 - Original price $75.49
    Original price $75.49
    Current price $69.95
    $69.95 - $69.95
    Current price $69.95

    Balboa Temperature & High Limit 12” Cord M7/VS/Value/LE/SUV/EL - 53605/ 32016

    Balboa
    Only 9 left!

    Balboa Hi Limit Probe/ Sensor 53605, This Sensor Assembly Hi Limit Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has a...

    View full details
    Original price $75.49
    Original price $75.49 - Original price $75.49
    Original price $75.49
    Current price $69.95
    $69.95 - $69.95
    Current price $69.95
    Save 7% Save %
  • Original price $56.22 - Original price $56.22
    Original price
    $56.22
    $56.22 - $56.22
    Current price $56.22

    Gecko Hi Limit Temperature Band for M-Class Packs

    Gecko

    The Gecko Hi limit sensor/ Band is an essential part of your hot tubs safety system. The high limit sensor will detect any problems that may occur ...

    View full details
    Original price $56.22 - Original price $56.22
    Original price
    $56.22
    $56.22 - $56.22
    Current price $56.22
  • Original price $55.00 - Original price $55.00
    Original price
    $55.00
    $55.00 - $55.00
    Current price $55.00

    Gecko Hi Limit Temperature Band for S-Class Packs

    Gecko
    Out of stock

    The Gecko Hi limit sensor/ Probe is an essential part of your hot tubs safety system. The high limit sensor will detect any problems that may occur...

    View full details
    Original price $55.00 - Original price $55.00
    Original price
    $55.00
    $55.00 - $55.00
    Current price $55.00
    Sold out
  • Original price $102.99 - Original price $102.99
    Original price
    $102.99
    $102.99 - $102.99
    Current price $102.99

    Gecko SSPA/MSPA-MP Temperature Sensor ¼” Probe 10’ Cable

    Gecko
    Out of stock

    The Gecko SSPA/MSPA-MP Temperature Sensor ¼” Probe connects directly to the SSPA and MSPA spa packs via a 4 pin plug  (only 3 wires are connected) ...

    View full details
    Original price $102.99 - Original price $102.99
    Original price
    $102.99
    $102.99 - $102.99
    Current price $102.99
    Sold out
  • Original price $199.98
    Original price $199.98 - Original price $199.98
    Original price $199.98
    Current price $139.98
    $139.98 - $139.98
    Current price $139.98

    Harwil Flow Switch Gecko connection

    Harwil
    Only 7 left!

    The Harwil flow switch 4090540 is the replacement for all Gecko controlled hot tubs. Specifications 1/2" NPT x 3" Length Replaces Pacific, Sundanc...

    View full details
    Original price $199.98
    Original price $199.98 - Original price $199.98
    Original price $199.98
    Current price $139.98
    $139.98 - $139.98
    Current price $139.98
    Save 30% Save %
  • Original price $189.98 - Original price $189.98
    Original price
    $189.98
    $189.98 - $189.98
    Current price $189.98

    Harwil Beachcomber Flow Switch Balboa connection

    Harwil
    Only 3 left!

    The Harwil flow switch 4090540 is the replacement for all Beachcomber hot tubs. Specifications 1/2" NPT x 3" Length Replaces Beachcomber Flow swit...

    View full details
    Original price $189.98 - Original price $189.98
    Original price
    $189.98
    $189.98 - $189.98
    Current price $189.98
  • Original price $38.99 - Original price $38.99
    Original price
    $38.99
    $38.99 - $38.99
    Current price $38.99

    Plastic Light Kit with Red and Blue lens

    ASP
    Only 1 left!

    Plastic replacement light kit is 3 1/4" on the face with a 2" backing nut, the light comes with a red and a blue lens

    Original price $38.99 - Original price $38.99
    Original price
    $38.99
    $38.99 - $38.99
    Current price $38.99

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare