Balboa BP501G1 5.5 KW Spa Pack - 56485-03
The BP family of Hot Tub Control Systems were designed using Balboa's patented M7 temperature and flow sensor technology and a new universal control platform. The systems have a plastic enclosure to eliminate water intrusion. Connectors are built onto the circuit board minimizing wires and simplifying service. This model has controls for a single two-speed pump and an additional 1 speed pump and blower. This model requires 240v 50amp power supply, has a 5.5kW heater and can support several digital control panels.
- Model BP501G1
- 240v Control for one 2 Speed Pump
- 240v Control for one 1 Speed Pump
- 240v Control for one Blower
- 120/240v ozone circuit
- 5.5kW heater
- 12v spa light circuit
- Patented M7 technology
- Wifi ready (Requires separate module 51159 to control system via WiFi)
- Plumb on pressure or vacuum side
- Canadian safety approvals
We listened and we added the new BP501/601 to the popular BP Series of spa controls. Based on the BP500/600, this new model can run up to a 5.5 kW heater (60Hz systems), supports an expander card to run another pump and has multiple panel jacks on the main board.
Includes Balboa's patented overheat Fault Detection for runaway pumps or stuck relays. The new M7 Plus software design incorporates patented technology using a microprocessor to intelligently monitor the hot tub water temperature and detect a runaway pump or stuck relays. If detected, the system will automatically attempt to shut the power off to the tub to prevent any overheating by trying to trip the GFCI in the circuit (per electrical codes). (BP501 only).
For serviceability, the new BP501/BP601 systems include a new single board configuration and have
Balboa’s new quick connect heater system – no more removing heater straps, just unplug the old heater
and plug in a new one.