Contact Us Free: (866) 316-9064
Monday - Friday
9AM - 5PM (PST)
Waterway Executive Hot tub/ Spa pumps
Filters
Waterway 2" Union Nut with 2" Slip Tail piece
WaterWay5.0 / 5.0
1 Review
Waterway Pump Union The Waterway 2" union with a 2" tail piece can be used to reduce the connection between the Waterway Hot Tub pump and the hot ...
View full detailsWhite PVC Reducer Bushing - 2" Spigot x 1.5" Slip -437-251
Dura Plastics5.0 / 5.0
1 Review
Details: 2" Spigot x 1.5"Slip 2" spigot fits inside 2" slip fittings 1.5" slip fits onto outside of pipes with 1.5" diameter Use a good quality P...
View full detailsWeldon 725 Wet R Dry PVC Pipe Glue - 1/2 Pint
WeldOnPlumbing Accessory Item: IPS 725 Wet R Dry Glue 1/4 Pint Blue Quality low VOC primer essential for proper softening and preparation of PVC and CPV...
View full details2" Pump Slit Nut Union
WaterWay5.0 / 5.0
1 Review
The 2" split nut pump union is the ideal way to replace a broken or damaged union on your hot tub system comes with 2 piece split union 2 screws
2.5" Pump Split Nut Union
WaterWay5.0 / 5.0
1 Review
The 2.5" split nut pump union is the ideal way to replace a broken or damaged union on your hot tub system comes with 2 piece split union 2 screws
2.5" x 2" SCH 40 Reducing Bushing SpxSlip
WaterWayThe reducing bush is used to reduce the size of one pipe to the other, in this case from a 2.5" pipe to 2"
2" Flat Gasket with Embedded O Ring
WaterWay5.0 / 5.0
5 Reviews
The 2" flat gasket with the embedded O Ring is used for the union connection to the pump or heater tube on hot tub systems. Colour may vary - Whit...
View full details2.5" Flat Gasket with Embedded O Ring
WaterWay5.0 / 5.0
2 Reviews
The 2.5" flat gasket with the embedded O Ring is used for the union connection to the pump or heater tube on hot tub systems
3/8" B x 1/4" MPT Fitting - Air Line Barb for Wet Ends
WaterWayThe 3/8" B x 1/4" MPT Fitting is used to connect the air bleed line on some hot tubs from the pump wet end the PVC tubing.
1.5" Flat Gasket with Embedded O Ring
WaterWay5.0 / 5.0
0 Review
The 1.5" flat gasket with the embedded O Ring is used for the union connection to the pump or heater tube on hot tub systems
Waterway 2" Pump Union O'Ring
WaterWayThe Waterway 2" pump union O'Ring should be replaced whenever a new pump is installed to prevent leaks on the pump union connection When installing...
View full detailsWaterway 2" Pump Union O'Ring - 2 O'Rings
WaterWayThe Waterway 2" pump union O'Ring should be replaced whenever a new pump is installed to prevent leaks on the pump union connection When installing...
View full details1" Waterways Union Assembly for Tiny Might Pump
WaterwayWaterway Pump union for the Waterway Tiny Might pumps. 1" union threads with 1" slip Inside Diameter 1-7/8" Compatible with Waterway Tiny Might...
View full details5/8" Double Sealed Pump Bearing (6203-625DDUC3E)
Pool Store CanadaThe 5/8" Double Sealed Bearing (6203-625DDUC3E) is the replacement for a Century pump bearing that is located at the rear of the pump motor. The ...
View full detailsMagic Lube II Silicone Lubricant Sealant 1 OZ
AlladinMAGIC LUBE II® silicone based lubricant and sealer formulated for use on all rubber based seals and orings used in the pool and hot tub industry....
View full details1.5" Waterways Union Assembly
WaterwayWaterway Pump union for the Waterway Tiny Might pumps. 1.5" union threads with 1.5" slip Compatible with Waterway 1.5" Pumps Made with durable ...
View full detailsWaterway 2" pump Face Plate - 48/ 56 Frame
WaterWayThe Waterway 2" faceplate will fit the Executive 48 and 56 frame range of pumps. This can be easily changed over by removing the faceplate screws f...
View full details