If you find that your hot tub does not register the correct temperature on the top side display, you may need to replace the temp sensor to correct this.
An easy diagnoses is to remove the temp sensor and place in a container of hot water making sure you know the correct temperature. Once you have left the temp sensor in the water for 2 minutes check the top side display reading and compare with the thermometer in the container.
If you have a discrepancy between the two then replace the temp sensor with a new one.
Balboa Hi Limit Pobe/ Sensor 30298, This Sensor Assembly Hi Limt Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has a 3...
View full detailsThe Balboa Sensor mount is for the M7 heater system only. Use this mount for the Temp Sensor and the Hi Limit probes This item is final sale
Balboa Temperature Sensor 30327, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has ...
View full detailsBalboa Temperature Sensor 30326, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has ...
View full detailsBalboa Temperature Sensor 30294, This Sensor Assembly a Temperature Sensor and connects to the spa pack board by a 2 pin plug Temperature Sensor...
View full detailsBalboa Temperature Sensor 30352, This Sensor Assembly a Temperature Sensor and connects to the spa pack board. Temperature Sensor 96" Cord Th...
View full detailsBalboa Hi Limit / Temperature Sensor 30337, This Sensor Assembly Contains two Sensors a Hi Limit and a Temperature Sensor and connects via a 4 Pin ...
View full detailsBalboa Hi Limit Probe/ Sensor 53605, This Sensor Assembly Hi Limit Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has a...
View full detailsBalboa Hi Limit Probe/ Sensor 53605, This Sensor Assembly Hi Limit Sensor and connects to the spa pack board by a 2 pin plug. The temp sensor has a...
View full detailsThe Gecko Hi limit sensor/ Band is an essential part of your hot tubs safety system. The high limit sensor will detect any problems that may occur ...
View full detailsThe Harwil flow switch 4090540 is the replacement for all Gecko controlled hot tubs. Specifications 1/2" NPT x 3" Length Replaces Pacific, Sundanc...
View full detailsThe Harwil flow switch 4090540 is the replacement for all Beachcomber hot tubs. Specifications 1/2" NPT x 3" Length Replaces Beachcomber Flow swit...
View full detailsPlastic replacement light kit is 3 1/4" on the face with a 2" backing nut, the light comes with a red and a blue lens
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
